Our PCI RAID 1 controller
mounts into any standard PCI slot. Use the provided cables to connect your IDE drives to the PCI controller and the controller to your motherboard. Then run our easy to use mirroring utility for total data redundancy.
The PCI controller provides up to the minute backup for your IDE drives and offers the ideal solution where no free
drive bay is available. If one drive fails, the second takes over automatically. Avoid costly and annoying downtime.
The PCI controller provides back panel status lights,
serial port and alarm reset.
| Drive
Interface |
IDE/E-IDE/UDMA |
| Data
Path |
IDE/E-IDE/UDMA
Defined by host controller |
| Hard
Disk Interface |
Cable
18 inches maximum 80
Conductor - 40 pin connector |
| Host
Interface |
Cable
18 inches maximum 80
Conductor - 40 pin connector |
| Electrical
Input |
Voltage
5V DC (+/- 5%) Current
450ma operating, 600ma peak |
| Physical
Dimensions |
Length:
4.725"
Width: 4.027” |
| Operating |
Temperature:
0 to 50 degrees C Humidity:
8 to 87% non-condensing |
| MTBF |
MIL-HDBK-217 = 580,383
hours
Bellcore rating = 2,695,418 hours |
| EMC/EMI
Compliance |
FCC class B certification
CE certification |